DPDK logo

Elixir Cross Referencer

/*-
 *   BSD LICENSE
 * 
 *   Copyright(c) 2010-2012 Intel Corporation. All rights reserved.
 *   All rights reserved.
 * 
 *   Redistribution and use in source and binary forms, with or without 
 *   modification, are permitted provided that the following conditions 
 *   are met:
 * 
 *     * Redistributions of source code must retain the above copyright 
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright 
 *       notice, this list of conditions and the following disclaimer in 
 *       the documentation and/or other materials provided with the 
 *       distribution.
 *     * Neither the name of Intel Corporation nor the names of its 
 *       contributors may be used to endorse or promote products derived 
 *       from this software without specific prior written permission.
 * 
 *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
 *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
 *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
 *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
 *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
 *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
 *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
 *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
 *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
 *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 *  version: DPDK.L.1.2.3-3
 */

#include <stdio.h>
#include <stdint.h>
#include <inttypes.h>
#include <unistd.h>
#include <sys/queue.h>

#include <cmdline_parse.h>

#include <rte_common.h>
#include <rte_memory.h>
#include <rte_memzone.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_cycles.h>
#include <rte_spinlock.h>

#include "test.h"

/*
 * Spinlock test
 * =============
 *
 * - There is a global spinlock and a table of spinlocks (one per lcore).
 *
 * - The test function takes all of these locks and launches the
 *   ``test_spinlock_per_core()`` function on each core (except the master).
 *
 *   - The function takes the global lock, display something, then releases
 *     the global lock.
 *   - The function takes the per-lcore lock, display something, then releases
 *     the per-core lock.
 *
 * - The main function unlocks the per-lcore locks sequentially and
 *   waits between each lock. This triggers the display of a message
 *   for each core, in the correct order. The autotest script checks that
 *   this order is correct.
 *
 * - A load test is carried out, with all cores attempting to lock a single lock
 *   multiple times
 */

static rte_spinlock_t sl, sl_try;
static rte_spinlock_t sl_tab[RTE_MAX_LCORE];
static rte_spinlock_recursive_t slr;
static unsigned count;

static int
test_spinlock_per_core(__attribute__((unused)) void *arg)
{
	rte_spinlock_lock(&sl);
	printf("Global lock taken on core %u\n", rte_lcore_id());
	rte_spinlock_unlock(&sl);

	rte_spinlock_lock(&sl_tab[rte_lcore_id()]);
	printf("Hello from core %u !\n", rte_lcore_id());
	rte_spinlock_unlock(&sl_tab[rte_lcore_id()]);

	return 0;
}

static int
test_spinlock_recursive_per_core(__attribute__((unused)) void *arg)
{
	unsigned id = rte_lcore_id();

	rte_spinlock_recursive_lock(&slr);
	printf("Global recursive lock taken on core %u - count = %d\n",
	       id, slr.count);
	rte_spinlock_recursive_lock(&slr);
	printf("Global recursive lock taken on core %u - count = %d\n",
	       id, slr.count);
	rte_spinlock_recursive_lock(&slr);
	printf("Global recursive lock taken on core %u - count = %d\n",
	       id, slr.count);

	printf("Hello from within recursive locks from core %u !\n", id);

	rte_spinlock_recursive_unlock(&slr);
	printf("Global recursive lock released on core %u - count = %d\n",
	       id, slr.count);
	rte_spinlock_recursive_unlock(&slr);
	printf("Global recursive lock released on core %u - count = %d\n",
	       id, slr.count);
	rte_spinlock_recursive_unlock(&slr);
	printf("Global recursive lock released on core %u - count = %d\n",
	       id, slr.count);

	return 0;
}

static volatile int count1, count2;
static rte_spinlock_t lk = RTE_SPINLOCK_INITIALIZER;
static unsigned int max = 10000000; /* 10M */
static volatile uint64_t looptime[RTE_MAX_LCORE];

static int
load_loop_fn(__attribute__((unused)) void *dummy)
{
	uint64_t end, begin;
	begin = rte_get_hpet_cycles();
	unsigned int i = 0;
	for ( i = 0; i < max; i++) {
		rte_spinlock_lock(&lk);
		count1++;
		rte_spinlock_unlock(&lk);
		count2++;
	}
	end = rte_get_hpet_cycles();
	looptime[rte_lcore_id()] = end - begin;
	return 0;
}

static int
test_spinlock_load(void)
{
	if (rte_lcore_count()<= 1) {
		printf("no cores counted\n");
		return -1;
	}
	printf ("Running %u tests.......\n", max);
	printf ("Number of cores = %u\n", rte_lcore_count());

	rte_eal_mp_remote_launch(load_loop_fn, NULL , CALL_MASTER);
	rte_eal_mp_wait_lcore();

	unsigned int k = 0;
	uint64_t avgtime = 0;

	RTE_LCORE_FOREACH(k) {
		printf("Core [%u] time = %"PRIu64"\n", k, looptime[k]);
		avgtime += looptime[k];
	}

	avgtime = avgtime / rte_lcore_count();
	printf("Average time = %"PRIu64"\n", avgtime);

	int check = 0;
	check =  max * rte_lcore_count();
	if (count1 == check && count2 != check)
		printf("Passed Load test\n");
	else {
		printf("Failed load test\n");
		return -1;
	}
	return 0;
}

/*
 * Use rte_spinlock_trylock() to trylock a spinlock object,
 * If it could not lock the object sucessfully, it would
 * return immediately and the variable of "count" would be
 * increased by one per times. the value of "count" could be
 * checked as the result later.
 */
static int
test_spinlock_try(__attribute__((unused)) void *arg)
{
	if (rte_spinlock_trylock(&sl_try) == 0) {
		rte_spinlock_lock(&sl);
		count ++;
		rte_spinlock_unlock(&sl);
	}

	return 0;
}


/*
 * Test rte_eal_get_lcore_state() in addition to spinlocks
 * as we have "waiting" then "running" lcores.
 */
int
test_spinlock(void)
{
	int ret = 0;
	int i;

	/* slave cores should be waiting: print it */
	RTE_LCORE_FOREACH_SLAVE(i) {
		printf("lcore %d state: %d\n", i,
		       (int) rte_eal_get_lcore_state(i));
	}

	rte_spinlock_init(&sl);
	rte_spinlock_init(&sl_try);
	rte_spinlock_recursive_init(&slr);
	for (i=0; i<RTE_MAX_LCORE; i++)
		rte_spinlock_init(&sl_tab[i]);

	rte_spinlock_lock(&sl);

	RTE_LCORE_FOREACH_SLAVE(i) {
		rte_spinlock_lock(&sl_tab[i]);
		rte_eal_remote_launch(test_spinlock_per_core, NULL, i);
	}

	/* slave cores should be busy: print it */
	RTE_LCORE_FOREACH_SLAVE(i) {
		printf("lcore %d state: %d\n", i,
		       (int) rte_eal_get_lcore_state(i));
	}
	rte_spinlock_unlock(&sl);

	RTE_LCORE_FOREACH_SLAVE(i) {
		rte_spinlock_unlock(&sl_tab[i]);
		rte_delay_ms(100);
	}

	rte_eal_mp_wait_lcore();

	if (test_spinlock_load()<0)
		return -1;

	rte_spinlock_recursive_lock(&slr);

	/*
	 * Try to acquire a lock that we already own
	 */
	if(!rte_spinlock_recursive_trylock(&slr)) {
		printf("rte_spinlock_recursive_trylock failed on a lock that "
		       "we already own\n");
		ret = -1;
	} else
		rte_spinlock_recursive_unlock(&slr);

	RTE_LCORE_FOREACH_SLAVE(i) {
		rte_eal_remote_launch(test_spinlock_recursive_per_core, NULL, i);
	}
	rte_spinlock_recursive_unlock(&slr);
	rte_eal_mp_wait_lcore();

	/*
	 * Test if it could return immediately from try-locking a locked object.
	 * Here it will lock the spinlock object first, then launch all the slave
	 * lcores to trylock the same spinlock object.
	 * All the slave lcores should give up try-locking a locked object and
	 * return immediately, and then increase the "count" initialized with zero
	 * by one per times.
	 * We can check if the "count" is finally equal to the number of all slave
	 * lcores to see if the behavior of try-locking a locked spinlock object
	 * is correct.
	 */
	if (rte_spinlock_trylock(&sl_try) == 0) {
		return -1;
	}
	count = 0;
	RTE_LCORE_FOREACH_SLAVE(i) {
		rte_eal_remote_launch(test_spinlock_try, NULL, i);
	}
	rte_eal_mp_wait_lcore();
	rte_spinlock_unlock(&sl_try);
	if (rte_spinlock_is_locked(&sl)) {
		printf("spinlock is locked but it should not be\n");
		return -1;
	}
	rte_spinlock_lock(&sl);
	if (count != ( rte_lcore_count() - 1)) {
		ret = -1;
	}
	rte_spinlock_unlock(&sl);

	/*
	 * Test if it can trylock recursively.
	 * Use rte_spinlock_recursive_trylock() to check if it can lock a spinlock
	 * object recursively. Here it will try to lock a spinlock object twice.
	 */
	if (rte_spinlock_recursive_trylock(&slr) == 0) {
		printf("It failed to do the first spinlock_recursive_trylock but it should able to do\n");
		return -1;
	}
	if (rte_spinlock_recursive_trylock(&slr) == 0) {
		printf("It failed to do the second spinlock_recursive_trylock but it should able to do\n");
		return -1;
	}
	rte_spinlock_recursive_unlock(&slr);
	rte_spinlock_recursive_unlock(&slr);

	return ret;
}