Contributing Code to DPDK
This document outlines the guidelines for submitting code to DPDK.
The DPDK development process is modelled (loosely) on the Linux Kernel development model so it is worth reading the
Linux kernel guide on submitting patches:
`How to Get Your Change Into the Linux Kernel <https://www.kernel.org/doc/html/latest/process/submitting-patches.html>`_.
The rationale for many of the DPDK guidelines is explained in greater detail in the kernel guidelines.
The DPDK Development Process
The DPDK development process has the following features:
* The code is hosted in a public git repository.
* There is a mailing list where developers submit patches.
* There are maintainers for hierarchical components.
* Patches are reviewed publicly on the mailing list.
* Successfully reviewed patches are merged to the repository.
* Patches should be sent to the target repository or sub-tree, see below.
* All sub-repositories are merged into main repository for ``-rc1`` and ``-rc2`` versions of the release.
* After the ``-rc2`` release all patches should target the main repository.
The mailing list for DPDK development is `email@example.com <http://dpdk.org/ml/archives/dev/>`_.
Contributors will need to `register for the mailing list <http://dpdk.org/ml/listinfo/dev>`_ in order to submit patches.
It is also worth registering for the DPDK `Patchwork <http://dpdk.org/dev/patchwork/project/dpdk/list/>`_
The development process requires some familiarity with the ``git`` version control system.
Refer to the `Pro Git Book <http://www.git-scm.com/book/>`_ for further information.
Maintainers and Sub-trees
The DPDK maintenance hierarchy is divided into a main repository ``dpdk`` and sub-repositories ``dpdk-next-*``.
There are maintainers for the trees and for components within the tree.
Trees and maintainers are listed in the ``MAINTAINERS`` file. For example::
M: Some Name <firstname.lastname@example.org>
B: Another Name <email@example.com>
Intel AES-NI GCM PMD
M: Some One <firstname.lastname@example.org>
* ``M`` is a tree or component maintainer.
* ``B`` is a tree backup maintainer.
* ``T`` is a repository tree.
* ``F`` is a maintained file or directory.
Additional details are given in the ``MAINTAINERS`` file.
The role of the component maintainers is to:
* Review patches for the component or delegate the review.
The review should be done, ideally, within 1 week of submission to the mailing list.
* Add an ``acked-by`` to patches, or patchsets, that are ready for committing to a tree.
Component maintainers can be added or removed by submitting a patch to the ``MAINTAINERS`` file.
Maintainers should have demonstrated a reasonable level of contributions or reviews to the component area.
The maintainer should be confirmed by an ``ack`` from an established contributor.
There can be more than one component maintainer if desired.
The role of the tree maintainers is to:
* Maintain the overall quality of their tree.
This can entail additional review, compilation checks or other tests deemed necessary by the maintainer.
* Commit patches that have been reviewed by component maintainers and/or other contributors.
The tree maintainer should determine if patches have been reviewed sufficiently.
* Ensure that patches are reviewed in a timely manner.
* Prepare the tree for integration.
* Ensure that there is a designated back-up maintainer and coordinate a handover for periods where the
tree maintainer can't perform their role.
Tree maintainers can be added or removed by submitting a patch to the ``MAINTAINERS`` file.
The proposer should justify the need for a new sub-tree and should have demonstrated a sufficient level of contributions in the area or to a similar area.
The maintainer should be confirmed by an ``ack`` from an existing tree maintainer.
Disagreements on trees or maintainers can be brought to the Technical Board.
The backup maintainer for the master tree should be selected from the existing sub-tree maintainers from the project.
The backup maintainer for a sub-tree should be selected from among the component maintainers within that sub-tree.
Getting the Source Code
The source code can be cloned using either of the following:
git clone git://dpdk.org/dpdk
git clone http://dpdk.org/git/dpdk
sub-repositories (`list <http://dpdk.org/browse/next>`_)::
git clone git://dpdk.org/next/dpdk-next-*
git clone http://dpdk.org/git/next/dpdk-next-*
Make your Changes
Make your planned changes in the cloned ``dpdk`` repo. Here are some guidelines and requirements:
* Follow the :ref:`coding_style` guidelines.
* If you add new files or directories you should add your name to the ``MAINTAINERS`` file.
* New external functions should be added to the local ``version.map`` file.
See the :doc:`Guidelines for ABI policy and versioning </contributing/versioning>`.
New external functions should also be added in alphabetical order.
* Important changes will require an addition to the release notes in ``doc/guides/rel_notes/``.
See the :ref:`Release Notes section of the Documentation Guidelines <doc_guidelines>` for details.
* Test the compilation works with different targets, compilers and options, see :ref:`contrib_check_compilation`.
* Don't break compilation between commits with forward dependencies in a patchset.
Each commit should compile on its own to allow for ``git bisect`` and continuous integration testing.
* Add tests to the the ``app/test`` unit test framework where possible.
* Add documentation, if relevant, in the form of Doxygen comments or a User Guide in RST format.
See the :ref:`Documentation Guidelines <doc_guidelines>`.
Once the changes have been made you should commit them to your local repo.
For small changes, that do not require specific explanations, it is better to keep things together in the
Larger changes that require different explanations should be separated into logical patches in a patchset.
A good way of thinking about whether a patch should be split is to consider whether the change could be
applied without dependencies as a backport.
As a guide to how patches should be structured run ``git log`` on similar files.
Commit Messages: Subject Line
The first, summary, line of the git commit message becomes the subject line of the patch email.
Here are some guidelines for the summary line:
* The summary line must capture the area and the impact of the change.
* The summary line should be around 50 characters.
* The summary line should be lowercase apart from acronyms.
* It should be prefixed with the component name (use git log to check existing components).
ixgbe: fix offload config option name
config: increase max queues per port
* Use the imperative of the verb (like instructions to the code base).
* Don't add a period/full stop to the subject line or you will end up two in the patch name: ``dpdk_description..patch``.
The actual email subject line should be prefixed by ``[PATCH]`` and the version, if greater than v1,
for example: ``PATCH v2``.
The is generally added by ``git send-email`` or ``git format-patch``, see below.
If you are submitting an RFC draft of a feature you can use ``[RFC]`` instead of ``[PATCH]``.
An RFC patch doesn't have to be complete.
It is intended as a way of getting early feedback.
Commit Messages: Body
Here are some guidelines for the body of a commit message:
* The body of the message should describe the issue being fixed or the feature being added.
It is important to provide enough information to allow a reviewer to understand the purpose of the patch.
* When the change is obvious the body can be blank, apart from the signoff.
* The commit message must end with a ``Signed-off-by:`` line which is added using::
git commit --signoff # or -s
The purpose of the signoff is explained in the
`Developer's Certificate of Origin <https://www.kernel.org/doc/html/latest/process/submitting-patches.html#developer-s-certificate-of-origin-1-1>`_
section of the Linux kernel guidelines.
All developers must ensure that they have read and understood the
Developer's Certificate of Origin section of the documentation prior
to applying the signoff and submitting a patch.
* The signoff must be a real name and not an alias or nickname.
More than one signoff is allowed.
* The text of the commit message should be wrapped at 72 characters.
* When fixing a regression, it is a good idea to reference the id of the commit which introduced the bug.
You can generate the required text using the following git alias::
git config alias.fixline "log -1 --abbrev=12 --format='Fixes: %h (\"%s\")'"
The ``Fixes:`` line can then be added to the commit message::
doc: fix vhost sample parameter
Update the docs to reflect removed dev-index.
Fixes: 17b8320a3e11 ("vhost: remove index parameter")
Signed-off-by: Alex Smith <email@example.com>
* When fixing an error or warning it is useful to add the error message and instructions on how to reproduce it.
* Use correct capitalization, punctuation and spelling.
In addition to the ``Signed-off-by:`` name the commit messages can also have
tags for who reported, suggested, tested and reviewed the patch being
posted. Please refer to the `Tested, Acked and Reviewed by`_ section.
It is possible to send patches directly from git but for new contributors it is recommended to generate the
patches with ``git format-patch`` and then when everything looks okay, and the patches have been checked, to
send them with ``git send-email``.
Here are some examples of using ``git format-patch`` to generate patches:
.. code-block:: console
# Generate a patch from the last commit.
git format-patch -1
# Generate a patch from the last 3 commits.
git format-patch -3
# Generate the patches in a directory.
git format-patch -3 -o ~/patch/
# Add a cover letter to explain a patchset.
git format-patch -3 -o ~/patch/ --cover-letter
# Add a prefix with a version number.
git format-patch -3 -o ~/patch/ -v 2
Cover letters are useful for explaining a patchset and help to generate a logical threading to the patches.
Smaller notes can be put inline in the patch after the ``---`` separator, for example::
Subject: [PATCH] fm10k/base: add FM10420 device ids
Add the device ID for Boulder Rapids and Atwood Channel to enable
drivers to support those devices.
Signed-off-by: Alex Smith <firstname.lastname@example.org>
ADD NOTES HERE.
drivers/net/fm10k/base/fm10k_api.c | 6 ++++++
drivers/net/fm10k/base/fm10k_type.h | 6 ++++++
2 files changed, 12 insertions(+)
Version 2 and later of a patchset should also include a short log of the changes so the reviewer knows what has changed.
This can be added to the cover letter or the annotations.
* Fixed issued with version.map.
* Added i40e support.
* Renamed ethdev functions from rte_eth_ieee15888_*() to rte_eth_timesync_*()
since 802.1AS can be supported through the same interfaces.
Checking the Patches
Patches should be checked for formatting and syntax issues using the ``checkpatches.sh`` script in the ``devtools``
directory of the DPDK repo.
This uses the Linux kernel development tool ``checkpatch.pl`` which can be obtained by cloning, and periodically,
updating the Linux kernel sources.
The path to the original Linux script must be set in the environment variable ``DPDK_CHECKPATCH_PATH``.
This, and any other configuration variables required by the development tools, are loaded from the following
files, in order of preference::
Once the environment variable the script can be run as follows::
The script usage is::
checkpatches.sh [-h] [-q] [-v] [patch1 [patch2] ...]]"
* ``-h``: help, usage.
* ``-q``: quiet. Don't output anything for files without issues.
* ``-v``: verbose.
* ``patchX``: path to one or more patches.
Then the git logs should be checked using the ``check-git-log.sh`` script.
The script usage is::
Where the range is a ``git log`` option.
Compilation of patches and changes should be tested using the the ``test-build.sh`` script in the ``devtools``
directory of the DPDK repo::
The script usage is::
test-build.sh [-h] [-jX] [-s] [config1 [config2] ...]]
* ``-h``: help, usage.
* ``-jX``: use X parallel jobs in "make".
* ``-s``: short test with only first config and without examples/doc.
* ``config``: default config name plus config switches delimited with a ``+`` sign.
Examples of configs are::
The builds can be modifies via the following environmental variables:
* ``DPDK_BUILD_TEST_CONFIGS`` (target1+option1+option2 target2)
* ``DPDK_DEP_MOFED`` (y/[n])
* ``DPDK_DEP_PCAP`` (y/[n])
* ``DPDK_NOTIFY`` (notify-send)
These can be set from the command line or in the config files shown above in the :ref:`contrib_checkpatch`.
The recommended configurations and options to test compilation prior to submitting patches are::
Patches should be sent to the mailing list using ``git send-email``.
You can configure an external SMTP with something like the following::
smtpuser = email@example.com
smtpserver = smtp.domain.com
smtpserverport = 465
smtpencryption = ssl
See the `Git send-email <https://git-scm.com/docs/git-send-email>`_ documentation for more details.
The patches should be sent to ``firstname.lastname@example.org``.
If the patches are a change to existing files then you should send them TO the maintainer(s) and CC ``email@example.com``.
The appropriate maintainer can be found in the ``MAINTAINERS`` file::
git send-email --to firstname.lastname@example.org --cc email@example.com 000*.patch
New additions can be sent without a maintainer::
git send-email --to firstname.lastname@example.org 000*.patch
You can test the emails by sending it to yourself or with the ``--dry-run`` option.
If the patch is in relation to a previous email thread you can add it to the same thread using the Message ID::
git send-email --to email@example.com --in-reply-to <firstname.lastname@example.org> 000*.patch
The Message ID can be found in the raw text of emails or at the top of each Patchwork patch,
`for example <http://dpdk.org/dev/patchwork/patch/7646/>`_.
Shallow threading (``--thread --no-chain-reply-to``) is preferred for a patch series.
Once submitted your patches will appear on the mailing list and in Patchwork.
Experienced committers may send patches directly with ``git send-email`` without the ``git format-patch`` step.
The options ``--annotate`` and ``confirm = always`` are recommended for checking patches before sending.
The Review Process
Patches are reviewed by the community, relying on the experience and
collaboration of the members to double-check each other's work. There are a
number of ways to indicate that you have checked a patch on the mailing list.
Tested, Acked and Reviewed by
To indicate that you have interacted with a patch on the mailing list you
should respond to the patch in an email with one of the following tags:
The tag should be on a separate line as follows::
tag-here: Name Surname <email@example.com>
Each of these tags has a specific meaning. In general, the DPDK community
follows the kernel usage of the tags. A short summary of the meanings of each
tag is given here for reference:
.. _statement: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#reviewer-s-statement-of-oversight
``Reviewed-by:`` is a strong statement_ that the patch is an appropriate state
for merging without any remaining serious technical issues. Reviews from
community members who are known to understand the subject area and to perform
thorough reviews will increase the likelihood of the patch getting merged.
``Acked-by:`` is a record that the person named was not directly involved in
the preparation of the patch but wishes to signify and record their acceptance
and approval of it.
``Tested-by:`` indicates that the patch has been successfully tested (in some
environment) by the person named.
``Reported-by:`` is used to acknowledge person who found or reported the bug.
``Suggested-by:`` indicates that the patch idea was suggested by the named
Steps to getting your patch merged
The more work you put into the previous steps the easier it will be to get a
patch accepted. The general cycle for patch review and acceptance is:
#. Submit the patch.
#. Check the automatic test reports in the coming hours.
#. Wait for review comments. While you are waiting review some other patches.
#. Fix the review comments and submit a ``v n+1`` patchset::
git format-patch -3 -v 2
#. Update Patchwork to mark your previous patches as "Superseded".
#. If the patch is deemed suitable for merging by the relevant maintainer(s) or other developers they will ``ack``
the patch with an email that includes something like::
Acked-by: Alex Smith <firstname.lastname@example.org>
**Note**: When acking patches please remove as much of the text of the patch email as possible.
It is generally best to delete everything after the ``Signed-off-by:`` line.
#. Having the patch ``Reviewed-by:`` and/or ``Tested-by:`` will also help the patch to be accepted.
#. If the patch isn't deemed suitable based on being out of scope or conflicting with existing functionality
it may receive a ``nack``.
In this case you will need to make a more convincing technical argument in favor of your patches.
#. In addition a patch will not be accepted if it doesn't address comments from a previous version with fixes or
#. Acked patches will be merged in the current or next merge window.