/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2010-2016 Intel Corporation.
* Copyright 2014-2016 6WIND S.A.
*/
#ifndef _RTE_MBUF_PTYPE_H_
#define _RTE_MBUF_PTYPE_H_
/**
* @file
* RTE Mbuf Packet Types
*
* This file contains declarations for features related to mbuf packet
* types. The packet type gives information about the data carried by the
* mbuf, and is stored in the mbuf in a 32 bits field.
*
* The 32 bits are divided into several fields to mark packet types. Note that
* each field is indexical.
* - Bit 3:0 is for L2 types.
* - Bit 7:4 is for L3 or outer L3 (for tunneling case) types.
* - Bit 11:8 is for L4 or outer L4 (for tunneling case) types.
* - Bit 15:12 is for tunnel types.
* - Bit 19:16 is for inner L2 types.
* - Bit 23:20 is for inner L3 types.
* - Bit 27:24 is for inner L4 types.
* - Bit 31:28 is reserved.
*
* To be compatible with Vector PMD, RTE_PTYPE_L3_IPV4, RTE_PTYPE_L3_IPV4_EXT,
* RTE_PTYPE_L3_IPV6, RTE_PTYPE_L3_IPV6_EXT, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP
* and RTE_PTYPE_L4_SCTP should be kept as below in a contiguous 7 bits.
*
* Note that L3 types values are selected for checking IPV4/IPV6 header from
* performance point of view. Reading annotations of RTE_ETH_IS_IPV4_HDR and
* RTE_ETH_IS_IPV6_HDR is needed for any future changes of L3 type values.
*
* Note that the packet types of the same packet recognized by different
* hardware may be different, as different hardware may have different
* capability of packet type recognition.
*
* examples:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=0x29
* | 'version'=6, 'next header'=0x3A
* | 'ICMPv6 header'>
* will be recognized on i40e hardware as packet type combination of,
* RTE_PTYPE_L2_ETHER |
* RTE_PTYPE_L3_IPV4_EXT_UNKNOWN |
* RTE_PTYPE_TUNNEL_IP |
* RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
* RTE_PTYPE_INNER_L4_ICMP.
*
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=0x2F
* | 'GRE header'
* | 'version'=6, 'next header'=0x11
* | 'UDP header'>
* will be recognized on i40e hardware as packet type combination of,
* RTE_PTYPE_L2_ETHER |
* RTE_PTYPE_L3_IPV6_EXT_UNKNOWN |
* RTE_PTYPE_TUNNEL_GRENAT |
* RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN |
* RTE_PTYPE_INNER_L4_UDP.
*/
#include <stddef.h>
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* No packet type information.
*/
#define RTE_PTYPE_UNKNOWN 0x00000000
/**
* Ethernet packet type.
* It is used for outer packet for tunneling cases.
*
* Packet format:
* <'ether type'=[0x0800|0x86DD]>
*/
#define RTE_PTYPE_L2_ETHER 0x00000001
/**
* Ethernet packet type for time sync.
*
* Packet format:
* <'ether type'=0x88F7>
*/
#define RTE_PTYPE_L2_ETHER_TIMESYNC 0x00000002
/**
* ARP (Address Resolution Protocol) packet type.
*
* Packet format:
* <'ether type'=0x0806>
*/
#define RTE_PTYPE_L2_ETHER_ARP 0x00000003
/**
* LLDP (Link Layer Discovery Protocol) packet type.
*
* Packet format:
* <'ether type'=0x88CC>
*/
#define RTE_PTYPE_L2_ETHER_LLDP 0x00000004
/**
* NSH (Network Service Header) packet type.
*
* Packet format:
* <'ether type'=0x894F>
*/
#define RTE_PTYPE_L2_ETHER_NSH 0x00000005
/**
* VLAN packet type.
*
* Packet format:
* <'ether type'=[0x8100]>
*/
#define RTE_PTYPE_L2_ETHER_VLAN 0x00000006
/**
* QinQ packet type.
*
* Packet format:
* <'ether type'=[0x88A8]>
*/
#define RTE_PTYPE_L2_ETHER_QINQ 0x00000007
/**
* PPPOE packet type.
*
* Packet format:
* <'ether type'=[0x8863|0x8864]>
*/
#define RTE_PTYPE_L2_ETHER_PPPOE 0x00000008
/**
* FCoE packet type.
*
* Packet format:
* <'ether type'=[0x8906]>
*/
#define RTE_PTYPE_L2_ETHER_FCOE 0x00000009
/**
* MPLS packet type.
*
* Packet format:
* <'ether type'=[0x8847|0x8848]>
*/
#define RTE_PTYPE_L2_ETHER_MPLS 0x0000000a
/**
* Mask of layer 2 packet types.
* It is used for outer packet for tunneling cases.
*/
#define RTE_PTYPE_L2_MASK 0x0000000f
/**
* IP (Internet Protocol) version 4 packet type.
* It is used for outer packet for tunneling cases, and does not contain any
* header option.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'ihl'=5>
*/
#define RTE_PTYPE_L3_IPV4 0x00000010
/**
* IP (Internet Protocol) version 4 packet type.
* It is used for outer packet for tunneling cases, and contains header
* options.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'ihl'=[6-15], 'options'>
*/
#define RTE_PTYPE_L3_IPV4_EXT 0x00000030
/**
* IP (Internet Protocol) version 6 packet type.
* It is used for outer packet for tunneling cases, and does not contain any
* extension header.
*
* Packet format:
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=0x3B>
*/
#define RTE_PTYPE_L3_IPV6 0x00000040
/**
* IP (Internet Protocol) version 4 packet type.
* It is used for outer packet for tunneling cases, and may or maynot contain
* header options.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'ihl'=[5-15], <'options'>>
*/
#define RTE_PTYPE_L3_IPV4_EXT_UNKNOWN 0x00000090
/**
* IP (Internet Protocol) version 6 packet type.
* It is used for outer packet for tunneling cases, and contains extension
* headers.
*
* Packet format:
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
* 'extension headers'>
*/
#define RTE_PTYPE_L3_IPV6_EXT 0x000000c0
/**
* IP (Internet Protocol) version 6 packet type.
* It is used for outer packet for tunneling cases, and may or maynot contain
* extension headers.
*
* Packet format:
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
* <'extension headers'>>
*/
#define RTE_PTYPE_L3_IPV6_EXT_UNKNOWN 0x000000e0
/**
* Mask of layer 3 packet types.
* It is used for outer packet for tunneling cases.
*/
#define RTE_PTYPE_L3_MASK 0x000000f0
/**
* TCP (Transmission Control Protocol) packet type.
* It is used for outer packet for tunneling cases.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=6, 'MF'=0, 'frag_offset'=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=6>
*/
#define RTE_PTYPE_L4_TCP 0x00000100
/**
* UDP (User Datagram Protocol) packet type.
* It is used for outer packet for tunneling cases.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=17, 'MF'=0, 'frag_offset'=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=17>
*/
#define RTE_PTYPE_L4_UDP 0x00000200
/**
* Fragmented IP (Internet Protocol) packet type.
* It is used for outer packet for tunneling cases.
*
* It refers to those packets of any IP types, which can be recognized as
* fragmented. A fragmented packet cannot be recognized as any other L4 types
* (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP,
* RTE_PTYPE_L4_NONFRAG).
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'MF'=1>
* or,
* <'ether type'=0x0800
* | 'version'=4, 'frag_offset'!=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=44>
*/
#define RTE_PTYPE_L4_FRAG 0x00000300
/**
* SCTP (Stream Control Transmission Protocol) packet type.
* It is used for outer packet for tunneling cases.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=132, 'MF'=0, 'frag_offset'=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=132>
*/
#define RTE_PTYPE_L4_SCTP 0x00000400
/**
* ICMP (Internet Control Message Protocol) packet type.
* It is used for outer packet for tunneling cases.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=1, 'MF'=0, 'frag_offset'=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=1>
*/
#define RTE_PTYPE_L4_ICMP 0x00000500
/**
* Non-fragmented IP (Internet Protocol) packet type.
* It is used for outer packet for tunneling cases.
*
* It refers to those packets of any IP types, while cannot be recognized as
* any of above L4 types (RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP,
* RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_SCTP, RTE_PTYPE_L4_ICMP).
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0, 'frag_offset'=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'!=[6|17|44|132|1]>
*/
#define RTE_PTYPE_L4_NONFRAG 0x00000600
/**
* IGMP (Internet Group Management Protocol) packet type.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=2, 'MF'=0, 'frag_offset'=0>
*/
#define RTE_PTYPE_L4_IGMP 0x00000700
/**
* Mask of layer 4 packet types.
* It is used for outer packet for tunneling cases.
*/
#define RTE_PTYPE_L4_MASK 0x00000f00
/**
* IP (Internet Protocol) in IP (Internet Protocol) tunneling packet type.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=[4|41]>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=[4|41]>
*/
#define RTE_PTYPE_TUNNEL_IP 0x00001000
/**
* GRE (Generic Routing Encapsulation) tunneling packet type.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=47>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=47>
*/
#define RTE_PTYPE_TUNNEL_GRE 0x00002000
/**
* VXLAN (Virtual eXtensible Local Area Network) tunneling packet type.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=17
* | 'destination port'=4789>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=17
* | 'destination port'=4789>
*/
#define RTE_PTYPE_TUNNEL_VXLAN 0x00003000
/**
* NVGRE (Network Virtualization using Generic Routing Encapsulation) tunneling
* packet type.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=47
* | 'protocol type'=0x6558>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=47
* | 'protocol type'=0x6558'>
*/
#define RTE_PTYPE_TUNNEL_NVGRE 0x00004000
/**
* GENEVE (Generic Network Virtualization Encapsulation) tunneling packet type.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=17
* | 'destination port'=6081>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=17
* | 'destination port'=6081>
*/
#define RTE_PTYPE_TUNNEL_GENEVE 0x00005000
/**
* Tunneling packet type of Teredo, VXLAN (Virtual eXtensible Local Area
* Network) or GRE (Generic Routing Encapsulation) could be recognized as this
* packet type, if they can not be recognized independently as of hardware
* capability.
*/
#define RTE_PTYPE_TUNNEL_GRENAT 0x00006000
/**
* GTP-C (GPRS Tunnelling Protocol) control tunneling packet type.
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=17
* | 'destination port'=2123>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=17
* | 'destination port'=2123>
* or,
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=17
* | 'source port'=2123>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=17
* | 'source port'=2123>
*/
#define RTE_PTYPE_TUNNEL_GTPC 0x00007000
/**
* GTP-U (GPRS Tunnelling Protocol) user data tunneling packet type.
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=17
* | 'destination port'=2152>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=17
* | 'destination port'=2152>
*/
#define RTE_PTYPE_TUNNEL_GTPU 0x00008000
/**
* ESP (IP Encapsulating Security Payload) tunneling packet type.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=51>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=51>
*/
#define RTE_PTYPE_TUNNEL_ESP 0x00009000
/**
* L2TP (Layer 2 Tunneling Protocol) tunneling packet type.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=17>
* | 'destination port'=1701>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=17
* | 'destination port'=1701>
* or,
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=115>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'protocol'=115>
*/
#define RTE_PTYPE_TUNNEL_L2TP 0x0000a000
/**
* VXLAN-GPE (VXLAN Generic Protocol Extension) tunneling packet type.
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=17
* | 'destination port'=4790>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=17
* | 'destination port'=4790>
*/
#define RTE_PTYPE_TUNNEL_VXLAN_GPE 0x0000b000
/**
* MPLS-in-GRE tunneling packet type (RFC 4023).
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=47
* | 'protocol'=0x8847>
* or,
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=47
* | 'protocol'=0x8848>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'protocol'=47
* | 'protocol'=0x8847>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=47
* | 'protocol'=0x8848>
*/
#define RTE_PTYPE_TUNNEL_MPLS_IN_GRE 0x0000c000
/**
* MPLS-in-UDP tunneling packet type (RFC 7510).
*
* Packet format:
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=17
* | 'destination port'=6635>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=17
* | 'destination port'=6635>
*/
#define RTE_PTYPE_TUNNEL_MPLS_IN_UDP 0x0000d000
/**
* Mask of tunneling packet types.
*/
#define RTE_PTYPE_TUNNEL_MASK 0x0000f000
/**
* Ethernet packet type.
* It is used for inner packet type only.
*
* Packet format (inner only):
* <'ether type'=[0x800|0x86DD]>
*/
#define RTE_PTYPE_INNER_L2_ETHER 0x00010000
/**
* Ethernet packet type with VLAN (Virtual Local Area Network) tag.
*
* Packet format (inner only):
* <'ether type'=[0x800|0x86DD], vlan=[1-4095]>
*/
#define RTE_PTYPE_INNER_L2_ETHER_VLAN 0x00020000
/**
* QinQ packet type.
*
* Packet format:
* <'ether type'=[0x88A8]>
*/
#define RTE_PTYPE_INNER_L2_ETHER_QINQ 0x00030000
/**
* Mask of inner layer 2 packet types.
*/
#define RTE_PTYPE_INNER_L2_MASK 0x000f0000
/**
* IP (Internet Protocol) version 4 packet type.
* It is used for inner packet only, and does not contain any header option.
*
* Packet format (inner only):
* <'ether type'=0x0800
* | 'version'=4, 'ihl'=5>
*/
#define RTE_PTYPE_INNER_L3_IPV4 0x00100000
/**
* IP (Internet Protocol) version 4 packet type.
* It is used for inner packet only, and contains header options.
*
* Packet format (inner only):
* <'ether type'=0x0800
* | 'version'=4, 'ihl'=[6-15], 'options'>
*/
#define RTE_PTYPE_INNER_L3_IPV4_EXT 0x00200000
/**
* IP (Internet Protocol) version 6 packet type.
* It is used for inner packet only, and does not contain any extension header.
*
* Packet format (inner only):
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=0x3B>
*/
#define RTE_PTYPE_INNER_L3_IPV6 0x00300000
/**
* IP (Internet Protocol) version 4 packet type.
* It is used for inner packet only, and may or maynot contain header options.
*
* Packet format (inner only):
* <'ether type'=0x0800
* | 'version'=4, 'ihl'=[5-15], <'options'>>
*/
#define RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN 0x00400000
/**
* IP (Internet Protocol) version 6 packet type.
* It is used for inner packet only, and contains extension headers.
*
* Packet format (inner only):
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=[0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
* 'extension headers'>
*/
#define RTE_PTYPE_INNER_L3_IPV6_EXT 0x00500000
/**
* IP (Internet Protocol) version 6 packet type.
* It is used for inner packet only, and may or maynot contain extension
* headers.
*
* Packet format (inner only):
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=[0x3B|0x0|0x2B|0x2C|0x32|0x33|0x3C|0x87],
* <'extension headers'>>
*/
#define RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN 0x00600000
/**
* Mask of inner layer 3 packet types.
*/
#define RTE_PTYPE_INNER_L3_MASK 0x00f00000
/**
* TCP (Transmission Control Protocol) packet type.
* It is used for inner packet only.
*
* Packet format (inner only):
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=6, 'MF'=0, 'frag_offset'=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=6>
*/
#define RTE_PTYPE_INNER_L4_TCP 0x01000000
/**
* UDP (User Datagram Protocol) packet type.
* It is used for inner packet only.
*
* Packet format (inner only):
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=17, 'MF'=0, 'frag_offset'=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=17>
*/
#define RTE_PTYPE_INNER_L4_UDP 0x02000000
/**
* Fragmented IP (Internet Protocol) packet type.
* It is used for inner packet only, and may or maynot have layer 4 packet.
*
* Packet format (inner only):
* <'ether type'=0x0800
* | 'version'=4, 'MF'=1>
* or,
* <'ether type'=0x0800
* | 'version'=4, 'frag_offset'!=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=44>
*/
#define RTE_PTYPE_INNER_L4_FRAG 0x03000000
/**
* SCTP (Stream Control Transmission Protocol) packet type.
* It is used for inner packet only.
*
* Packet format (inner only):
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=132, 'MF'=0, 'frag_offset'=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=132>
*/
#define RTE_PTYPE_INNER_L4_SCTP 0x04000000
/**
* ICMP (Internet Control Message Protocol) packet type.
* It is used for inner packet only.
*
* Packet format (inner only):
* <'ether type'=0x0800
* | 'version'=4, 'protocol'=1, 'MF'=0, 'frag_offset'=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'=1>
*/
#define RTE_PTYPE_INNER_L4_ICMP 0x05000000
/**
* Non-fragmented IP (Internet Protocol) packet type.
* It is used for inner packet only, and may or maynot have other unknown layer
* 4 packet types.
*
* Packet format (inner only):
* <'ether type'=0x0800
* | 'version'=4, 'protocol'!=[6|17|132|1], 'MF'=0, 'frag_offset'=0>
* or,
* <'ether type'=0x86DD
* | 'version'=6, 'next header'!=[6|17|44|132|1]>
*/
#define RTE_PTYPE_INNER_L4_NONFRAG 0x06000000
/**
* Mask of inner layer 4 packet types.
*/
#define RTE_PTYPE_INNER_L4_MASK 0x0f000000
/**
* All valid layer masks.
*/
#define RTE_PTYPE_ALL_MASK 0x0fffffff
/**
* Check if the (outer) L3 header is IPv4. To avoid comparing IPv4 types one by
* one, bit 4 is selected to be used for IPv4 only. Then checking bit 4 can
* determine if it is an IPV4 packet.
*/
#define RTE_ETH_IS_IPV4_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV4)
/**
* Check if the (outer) L3 header is IPv6. To avoid comparing IPv6 types one by
* one, bit 6 is selected to be used for IPv6 only. Then checking bit 6 can
* determine if it is an IPV6 packet.
*/
#define RTE_ETH_IS_IPV6_HDR(ptype) ((ptype) & RTE_PTYPE_L3_IPV6)
/* Check if it is a tunneling packet */
#define RTE_ETH_IS_TUNNEL_PKT(ptype) ((ptype) & \
(RTE_PTYPE_TUNNEL_MASK | \
RTE_PTYPE_INNER_L2_MASK | \
RTE_PTYPE_INNER_L3_MASK | \
RTE_PTYPE_INNER_L4_MASK))
/**
* Get the name of the l2 packet type
*
* @param ptype
* The packet type value.
* @return
* A non-null string describing the packet type.
*/
const char *rte_get_ptype_l2_name(uint32_t ptype);
/**
* Get the name of the l3 packet type
*
* @param ptype
* The packet type value.
* @return
* A non-null string describing the packet type.
*/
const char *rte_get_ptype_l3_name(uint32_t ptype);
/**
* Get the name of the l4 packet type
*
* @param ptype
* The packet type value.
* @return
* A non-null string describing the packet type.
*/
const char *rte_get_ptype_l4_name(uint32_t ptype);
/**
* Get the name of the tunnel packet type
*
* @param ptype
* The packet type value.
* @return
* A non-null string describing the packet type.
*/
const char *rte_get_ptype_tunnel_name(uint32_t ptype);
/**
* Get the name of the inner_l2 packet type
*
* @param ptype
* The packet type value.
* @return
* A non-null string describing the packet type.
*/
const char *rte_get_ptype_inner_l2_name(uint32_t ptype);
/**
* Get the name of the inner_l3 packet type
*
* @param ptype
* The packet type value.
* @return
* A non-null string describing the packet type.
*/
const char *rte_get_ptype_inner_l3_name(uint32_t ptype);
/**
* Get the name of the inner_l4 packet type
*
* @param ptype
* The packet type value.
* @return
* A non-null string describing the packet type.
*/
const char *rte_get_ptype_inner_l4_name(uint32_t ptype);
/**
* Write the packet type name into the buffer
*
* @param ptype
* The packet type value.
* @param buf
* The buffer where the string is written.
* @param buflen
* The length of the buffer.
* @return
* - 0 on success
* - (-1) if the buffer is too small
*/
int rte_get_ptype_name(uint32_t ptype, char *buf, size_t buflen);
#ifdef __cplusplus
}
#endif
#endif /* _RTE_MBUF_PTYPE_H_ */