DPDK logo

Elixir Cross Referencer

#   BSD LICENSE
# 
#   Copyright(c) 2010-2013 Intel Corporation. All rights reserved.
#   All rights reserved.
# 
#   Redistribution and use in source and binary forms, with or without
#   modification, are permitted provided that the following conditions
#   are met:
# 
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in
#       the documentation and/or other materials provided with the
#       distribution.
#     * Neither the name of Intel Corporation nor the names of its
#       contributors may be used to endorse or promote products derived
#       from this software without specific prior written permission.
# 
#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

#
# define executive environment
#
# CONFIG_RTE_EXEC_ENV can be linuxapp, baremetal
#
CONFIG_RTE_EXEC_ENV="linuxapp"
CONFIG_RTE_EXEC_ENV_LINUXAPP=y

#
# machine can define specific variables or action for a specific board
# RTE_MACHINE can be:
# default  nothing specific
# native   current machine
# atm      Intel® Atom™ microarchitecture
# nhm      Intel® microarchitecture code name Nehalem
# wsm      Intel® microarchitecture code name Westmere
# snb      Intel® microarchitecture code name Sandy Bridge
# ivb      Intel® microarchitecture code name Ivy Bridge
#
# Note: if your compiler does not support the relevant -march options,
# it will be compiled with whatever latest processor the compiler supports!
#
CONFIG_RTE_MACHINE="native"

#
# define the architecture we compile for.
# CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
#
CONFIG_RTE_ARCH="x86_64"
CONFIG_RTE_ARCH_X86_64=y

#
# The compiler we use.
# Can be gcc or icc.
#
CONFIG_RTE_TOOLCHAIN="icc"
CONFIG_RTE_TOOLCHAIN_ICC=y

#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n

#
#
# Compile libc directory
#
CONFIG_RTE_LIBC=n

#
# Compile newlib as libc from source
#
CONFIG_RTE_LIBC_NEWLIB_SRC=n

#
# Use binary newlib
#
CONFIG_RTE_LIBC_NEWLIB_BIN=n

#
# Use binary newlib
#
CONFIG_RTE_LIBC_NETINCS=n

#
# Compile libgloss (newlib-stubs)
#
CONFIG_RTE_LIBGLOSS=n

#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=64
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_MEMSEG=256
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_LOG_LEVEL=8
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_UNBIND_PORTS=n

#
# Compile Environment Abstraction Layer for linux
#
CONFIG_RTE_LIBRTE_EAL_LINUXAPP=y

#
# Compile Environment Abstraction Layer for Bare metal
#
CONFIG_RTE_LIBRTE_EAL_BAREMETAL=n

#
# Compile Environment Abstraction Layer to support Vmware TSC map
# 
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y

#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16

#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n

#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP=n

#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n

#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16

#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n

#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y

#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
CONFIG_RTE_LIBRTE_RING_DEBUG=n
CONFIG_RTE_RING_SPLIT_PROD_CONS=n

#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n

#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_SCATTER_GATHER=y
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128

#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n

#
# Compile librte_malloc
#
CONFIG_RTE_LIBRTE_MALLOC=y
CONFIG_RTE_LIBRTE_MALLOC_DEBUG=n
CONFIG_RTE_MALLOC_MEMZONE_SIZE=11M

#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n

#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n

#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n

#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=y
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64

#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y

#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y

#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8

#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=y
CONFIG_RTE_LIBRTE_KNI_DEBUG=n
CONFIG_RTE_KNI_KO_DEBUG=n
CONFIG_RTE_KNI_VHOST=n
CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
CONFIG_RTE_KNI_VHOST_DEBUG_TX=n

#
# Enable warning directives
#
CONFIG_RTE_INSECURE_FUNCTION_WARNING=n

#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y

#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n