DPDK logo

Elixir Cross Referencer

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
/*-
 *   BSD LICENSE
 *
 *   Copyright(c) 2014-2017 Chelsio Communications.
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or without
 *   modification, are permitted provided that the following conditions
 *   are met:
 *
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in
 *       the documentation and/or other materials provided with the
 *       distribution.
 *     * Neither the name of Chelsio Communications nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/queue.h>
#include <stdio.h>
#include <errno.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <stdarg.h>
#include <inttypes.h>
#include <netinet/in.h>

#include <rte_byteorder.h>
#include <rte_common.h>
#include <rte_cycles.h>
#include <rte_interrupts.h>
#include <rte_log.h>
#include <rte_debug.h>
#include <rte_pci.h>
#include <rte_atomic.h>
#include <rte_branch_prediction.h>
#include <rte_memory.h>
#include <rte_memzone.h>
#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_alarm.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_ethdev_pci.h>
#include <rte_malloc.h>
#include <rte_random.h>
#include <rte_dev.h>

#include "common.h"
#include "t4_regs.h"
#include "t4_msg.h"
#include "cxgbe.h"

/*
 * Response queue handler for the FW event queue.
 */
static int fwevtq_handler(struct sge_rspq *q, const __be64 *rsp,
			  __rte_unused const struct pkt_gl *gl)
{
	u8 opcode = ((const struct rss_header *)rsp)->opcode;

	rsp++;                                          /* skip RSS header */

	/*
	 * FW can send EGR_UPDATEs encapsulated in a CPL_FW4_MSG.
	 */
	if (unlikely(opcode == CPL_FW4_MSG &&
		     ((const struct cpl_fw4_msg *)rsp)->type ==
		      FW_TYPE_RSSCPL)) {
		rsp++;
		opcode = ((const struct rss_header *)rsp)->opcode;
		rsp++;
		if (opcode != CPL_SGE_EGR_UPDATE) {
			dev_err(q->adapter, "unexpected FW4/CPL %#x on FW event queue\n",
				opcode);
			goto out;
		}
	}

	if (likely(opcode == CPL_SGE_EGR_UPDATE)) {
		/* do nothing */
	} else if (opcode == CPL_FW6_MSG || opcode == CPL_FW4_MSG) {
		const struct cpl_fw6_msg *msg = (const void *)rsp;

		t4_handle_fw_rpl(q->adapter, msg->data);
	} else {
		dev_err(adapter, "unexpected CPL %#x on FW event queue\n",
			opcode);
	}
out:
	return 0;
}

int setup_sge_fwevtq(struct adapter *adapter)
{
	struct sge *s = &adapter->sge;
	int err = 0;
	int msi_idx = 0;

	err = t4_sge_alloc_rxq(adapter, &s->fw_evtq, true, adapter->eth_dev,
			       msi_idx, NULL, fwevtq_handler, -1, NULL, 0,
			       rte_socket_id());
	return err;
}

static int closest_timer(const struct sge *s, int time)
{
	unsigned int i, match = 0;
	int delta, min_delta = INT_MAX;

	for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) {
		delta = time - s->timer_val[i];
		if (delta < 0)
			delta = -delta;
		if (delta < min_delta) {
			min_delta = delta;
			match = i;
		}
	}
	return match;
}

static int closest_thres(const struct sge *s, int thres)
{
	unsigned int i, match = 0;
	int delta, min_delta = INT_MAX;

	for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) {
		delta = thres - s->counter_val[i];
		if (delta < 0)
			delta = -delta;
		if (delta < min_delta) {
			min_delta = delta;
			match = i;
		}
	}
	return match;
}

/**
 * cxgb4_set_rspq_intr_params - set a queue's interrupt holdoff parameters
 * @q: the Rx queue
 * @us: the hold-off time in us, or 0 to disable timer
 * @cnt: the hold-off packet count, or 0 to disable counter
 *
 * Sets an Rx queue's interrupt hold-off time and packet count.  At least
 * one of the two needs to be enabled for the queue to generate interrupts.
 */
int cxgb4_set_rspq_intr_params(struct sge_rspq *q, unsigned int us,
			       unsigned int cnt)
{
	struct adapter *adap = q->adapter;
	unsigned int timer_val;

	if (cnt) {
		int err;
		u32 v, new_idx;

		new_idx = closest_thres(&adap->sge, cnt);
		if (q->desc && q->pktcnt_idx != new_idx) {
			/* the queue has already been created, update it */
			v = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) |
			    V_FW_PARAMS_PARAM_X(
			    FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) |
			    V_FW_PARAMS_PARAM_YZ(q->cntxt_id);
			err = t4_set_params(adap, adap->mbox, adap->pf, 0, 1,
					    &v, &new_idx);
			if (err)
				return err;
		}
		q->pktcnt_idx = new_idx;
	}

	timer_val = (us == 0) ? X_TIMERREG_RESTART_COUNTER :
				closest_timer(&adap->sge, us);

	if ((us | cnt) == 0)
		q->intr_params = V_QINTR_TIMER_IDX(X_TIMERREG_UPDATE_CIDX);
	else
		q->intr_params = V_QINTR_TIMER_IDX(timer_val) |
				 V_QINTR_CNT_EN(cnt > 0);
	return 0;
}

static inline bool is_x_1g_port(const struct link_config *lc)
{
	return (lc->supported & FW_PORT_CAP_SPEED_1G) != 0;
}

static inline bool is_x_10g_port(const struct link_config *lc)
{
	unsigned int speeds, high_speeds;

	speeds = V_FW_PORT_CAP_SPEED(G_FW_PORT_CAP_SPEED(lc->supported));
	high_speeds = speeds & ~(FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G);

	return high_speeds != 0;
}

inline void init_rspq(struct adapter *adap, struct sge_rspq *q,
		      unsigned int us, unsigned int cnt,
		      unsigned int size, unsigned int iqe_size)
{
	q->adapter = adap;
	cxgb4_set_rspq_intr_params(q, us, cnt);
	q->iqe_len = iqe_size;
	q->size = size;
}

int cfg_queue_count(struct rte_eth_dev *eth_dev)
{
	struct port_info *pi = (struct port_info *)(eth_dev->data->dev_private);
	struct adapter *adap = pi->adapter;
	struct sge *s = &adap->sge;
	unsigned int max_queues = s->max_ethqsets / adap->params.nports;

	if ((eth_dev->data->nb_rx_queues < 1) ||
	    (eth_dev->data->nb_tx_queues < 1))
		return -EINVAL;

	if ((eth_dev->data->nb_rx_queues > max_queues) ||
	    (eth_dev->data->nb_tx_queues > max_queues))
		return -EINVAL;

	if (eth_dev->data->nb_rx_queues > pi->rss_size)
		return -EINVAL;

	/* We must configure RSS, since config has changed*/
	pi->flags &= ~PORT_RSS_DONE;

	pi->n_rx_qsets = eth_dev->data->nb_rx_queues;
	pi->n_tx_qsets = eth_dev->data->nb_tx_queues;

	return 0;
}

void cfg_queues(struct rte_eth_dev *eth_dev)
{
	struct rte_config *config = rte_eal_get_configuration();
	struct port_info *pi = (struct port_info *)(eth_dev->data->dev_private);
	struct adapter *adap = pi->adapter;
	struct sge *s = &adap->sge;
	unsigned int i, nb_ports = 0, qidx = 0;
	unsigned int q_per_port = 0;

	if (!(adap->flags & CFG_QUEUES)) {
		for_each_port(adap, i) {
			struct port_info *tpi = adap2pinfo(adap, i);

			nb_ports += (is_x_10g_port(&tpi->link_cfg)) ||
				     is_x_1g_port(&tpi->link_cfg) ? 1 : 0;
		}

		/*
		 * We default up to # of cores queues per 1G/10G port.
		 */
		if (nb_ports)
			q_per_port = (MAX_ETH_QSETS -
				     (adap->params.nports - nb_ports)) /
				     nb_ports;

		if (q_per_port > config->lcore_count)
			q_per_port = config->lcore_count;

		for_each_port(adap, i) {
			struct port_info *pi = adap2pinfo(adap, i);

			pi->first_qset = qidx;

			/* Initially n_rx_qsets == n_tx_qsets */
			pi->n_rx_qsets = (is_x_10g_port(&pi->link_cfg) ||
					  is_x_1g_port(&pi->link_cfg)) ?
					  q_per_port : 1;
			pi->n_tx_qsets = pi->n_rx_qsets;

			if (pi->n_rx_qsets > pi->rss_size)
				pi->n_rx_qsets = pi->rss_size;

			qidx += pi->n_rx_qsets;
		}

		s->max_ethqsets = qidx;

		for (i = 0; i < ARRAY_SIZE(s->ethrxq); i++) {
			struct sge_eth_rxq *r = &s->ethrxq[i];

			init_rspq(adap, &r->rspq, 5, 32, 1024, 64);
			r->usembufs = 1;
			r->fl.size = (r->usembufs ? 1024 : 72);
		}

		for (i = 0; i < ARRAY_SIZE(s->ethtxq); i++)
			s->ethtxq[i].q.size = 1024;

		init_rspq(adap, &adap->sge.fw_evtq, 0, 0, 1024, 64);
		adap->flags |= CFG_QUEUES;
	}
}

void cxgbe_stats_get(struct port_info *pi, struct port_stats *stats)
{
	t4_get_port_stats_offset(pi->adapter, pi->tx_chan, stats,
				 &pi->stats_base);
}

void cxgbe_stats_reset(struct port_info *pi)
{
	t4_clr_port_stats(pi->adapter, pi->tx_chan);
}

static void setup_memwin(struct adapter *adap)
{
	u32 mem_win0_base;

	/* For T5, only relative offset inside the PCIe BAR is passed */
	mem_win0_base = MEMWIN0_BASE;

	/*
	 * Set up memory window for accessing adapter memory ranges.  (Read
	 * back MA register to ensure that changes propagate before we attempt
	 * to use the new values.)
	 */
	t4_write_reg(adap,
		     PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN,
					 MEMWIN_NIC),
		     mem_win0_base | V_BIR(0) |
		     V_WINDOW(ilog2(MEMWIN0_APERTURE) - X_WINDOW_SHIFT));
	t4_read_reg(adap,
		    PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN,
					MEMWIN_NIC));
}

static int init_rss(struct adapter *adap)
{
	unsigned int i;
	int err;

	err = t4_init_rss_mode(adap, adap->mbox);
	if (err)
		return err;

	for_each_port(adap, i) {
		struct port_info *pi = adap2pinfo(adap, i);

		pi->rss = rte_zmalloc(NULL, pi->rss_size * sizeof(u16), 0);
		if (!pi->rss)
			return -ENOMEM;
	}
	return 0;
}

/**
 * Dump basic information about the adapter.
 */
static void print_adapter_info(struct adapter *adap)
{
	/**
	 * Hardware/Firmware/etc. Version/Revision IDs.
	 */
	t4_dump_version_info(adap);
}

static void print_port_info(struct adapter *adap)
{
	int i;
	char buf[80];
	struct rte_pci_addr *loc = &adap->pdev->addr;

	for_each_port(adap, i) {
		const struct port_info *pi = &adap->port[i];
		char *bufp = buf;

		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M)
			bufp += sprintf(bufp, "100M/");
		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G)
			bufp += sprintf(bufp, "1G/");
		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G)
			bufp += sprintf(bufp, "10G/");
		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_25G)
			bufp += sprintf(bufp, "25G/");
		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_40G)
			bufp += sprintf(bufp, "40G/");
		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100G)
			bufp += sprintf(bufp, "100G/");
		if (bufp != buf)
			--bufp;
		sprintf(bufp, "BASE-%s",
			t4_get_port_type_description(
					(enum fw_port_type)pi->port_type));

		dev_info(adap,
			 " " PCI_PRI_FMT " Chelsio rev %d %s %s\n",
			 loc->domain, loc->bus, loc->devid, loc->function,
			 CHELSIO_CHIP_RELEASE(adap->params.chip), buf,
			 (adap->flags & USING_MSIX) ? " MSI-X" :
			 (adap->flags & USING_MSI) ? " MSI" : "");
	}
}

static void configure_pcie_ext_tag(struct adapter *adapter)
{
	u16 v;
	int pos = t4_os_find_pci_capability(adapter, PCI_CAP_ID_EXP);

	if (!pos)
		return;

	if (pos > 0) {
		t4_os_pci_read_cfg2(adapter, pos + PCI_EXP_DEVCTL, &v);
		v |= PCI_EXP_DEVCTL_EXT_TAG;
		t4_os_pci_write_cfg2(adapter, pos + PCI_EXP_DEVCTL, v);
		if (is_t6(adapter->params.chip)) {
			t4_set_reg_field(adapter, A_PCIE_CFG2,
					 V_T6_TOTMAXTAG(M_T6_TOTMAXTAG),
					 V_T6_TOTMAXTAG(7));
			t4_set_reg_field(adapter, A_PCIE_CMD_CFG,
					 V_T6_MINTAG(M_T6_MINTAG),
					 V_T6_MINTAG(8));
		} else {
			t4_set_reg_field(adapter, A_PCIE_CFG2,
					 V_TOTMAXTAG(M_TOTMAXTAG),
					 V_TOTMAXTAG(3));
			t4_set_reg_field(adapter, A_PCIE_CMD_CFG,
					 V_MINTAG(M_MINTAG),
					 V_MINTAG(8));
		}
	}
}

/*
 * Tweak configuration based on system architecture, etc.  Most of these have
 * defaults assigned to them by Firmware Configuration Files (if we're using
 * them) but need to be explicitly set if we're using hard-coded
 * initialization. So these are essentially common tweaks/settings for
 * Configuration Files and hard-coded initialization ...
 */
static int adap_init0_tweaks(struct adapter *adapter)
{
	u8 rx_dma_offset;

	/*
	 * Fix up various Host-Dependent Parameters like Page Size, Cache
	 * Line Size, etc.  The firmware default is for a 4KB Page Size and
	 * 64B Cache Line Size ...
	 */
	t4_fixup_host_params_compat(adapter, CXGBE_PAGE_SIZE, L1_CACHE_BYTES,
				    T5_LAST_REV);

	/*
	 * Keep the chip default offset to deliver Ingress packets into our
	 * DMA buffers to zero
	 */
	rx_dma_offset = 0;
	t4_set_reg_field(adapter, A_SGE_CONTROL, V_PKTSHIFT(M_PKTSHIFT),
			 V_PKTSHIFT(rx_dma_offset));

	t4_set_reg_field(adapter, A_SGE_FLM_CFG,
			 V_CREDITCNT(M_CREDITCNT) | M_CREDITCNTPACKING,
			 V_CREDITCNT(3) | V_CREDITCNTPACKING(1));

	t4_set_reg_field(adapter, A_SGE_INGRESS_RX_THRESHOLD,
			 V_THRESHOLD_3(M_THRESHOLD_3), V_THRESHOLD_3(32U));

	t4_set_reg_field(adapter, A_SGE_CONTROL2, V_IDMAARBROUNDROBIN(1U),
			 V_IDMAARBROUNDROBIN(1U));

	/*
	 * Don't include the "IP Pseudo Header" in CPL_RX_PKT checksums: Linux
	 * adds the pseudo header itself.
	 */
	t4_tp_wr_bits_indirect(adapter, A_TP_INGRESS_CONFIG,
			       F_CSUM_HAS_PSEUDO_HDR, 0);

	return 0;
}

/*
 * Attempt to initialize the adapter via a Firmware Configuration File.
 */
static int adap_init0_config(struct adapter *adapter, int reset)
{
	struct fw_caps_config_cmd caps_cmd;
	unsigned long mtype = 0, maddr = 0;
	u32 finiver, finicsum, cfcsum;
	int ret;
	int config_issued = 0;
	int cfg_addr;
	char config_name[20];

	/*
	 * Reset device if necessary.
	 */
	if (reset) {
		ret = t4_fw_reset(adapter, adapter->mbox,
				  F_PIORSTMODE | F_PIORST);
		if (ret < 0) {
			dev_warn(adapter, "Firmware reset failed, error %d\n",
				 -ret);
			goto bye;
		}
	}

	cfg_addr = t4_flash_cfg_addr(adapter);
	if (cfg_addr < 0) {
		ret = cfg_addr;
		dev_warn(adapter, "Finding address for firmware config file in flash failed, error %d\n",
			 -ret);
		goto bye;
	}

	strcpy(config_name, "On Flash");
	mtype = FW_MEMTYPE_CF_FLASH;
	maddr = cfg_addr;

	/*
	 * Issue a Capability Configuration command to the firmware to get it
	 * to parse the Configuration File.  We don't use t4_fw_config_file()
	 * because we want the ability to modify various features after we've
	 * processed the configuration file ...
	 */
	memset(&caps_cmd, 0, sizeof(caps_cmd));
	caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
					   F_FW_CMD_REQUEST | F_FW_CMD_READ);
	caps_cmd.cfvalid_to_len16 =
		cpu_to_be32(F_FW_CAPS_CONFIG_CMD_CFVALID |
			    V_FW_CAPS_CONFIG_CMD_MEMTYPE_CF(mtype) |
			    V_FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(maddr >> 16) |
			    FW_LEN16(caps_cmd));
	ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
			 &caps_cmd);
	/*
	 * If the CAPS_CONFIG failed with an ENOENT (for a Firmware
	 * Configuration File in FLASH), our last gasp effort is to use the
	 * Firmware Configuration File which is embedded in the firmware.  A
	 * very few early versions of the firmware didn't have one embedded
	 * but we can ignore those.
	 */
	if (ret == -ENOENT) {
		dev_info(adapter, "%s: Going for embedded config in firmware..\n",
			 __func__);

		memset(&caps_cmd, 0, sizeof(caps_cmd));
		caps_cmd.op_to_write =
			cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
				    F_FW_CMD_REQUEST | F_FW_CMD_READ);
		caps_cmd.cfvalid_to_len16 = cpu_to_be32(FW_LEN16(caps_cmd));
		ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd,
				 sizeof(caps_cmd), &caps_cmd);
		strcpy(config_name, "Firmware Default");
	}

	config_issued = 1;
	if (ret < 0)
		goto bye;

	finiver = be32_to_cpu(caps_cmd.finiver);
	finicsum = be32_to_cpu(caps_cmd.finicsum);
	cfcsum = be32_to_cpu(caps_cmd.cfcsum);
	if (finicsum != cfcsum)
		dev_warn(adapter, "Configuration File checksum mismatch: [fini] csum=%#x, computed csum=%#x\n",
			 finicsum, cfcsum);

	/*
	 * If we're a pure NIC driver then disable all offloading facilities.
	 * This will allow the firmware to optimize aspects of the hardware
	 * configuration which will result in improved performance.
	 */
	caps_cmd.niccaps &= cpu_to_be16(~(FW_CAPS_CONFIG_NIC_HASHFILTER |
					  FW_CAPS_CONFIG_NIC_ETHOFLD));
	caps_cmd.toecaps = 0;
	caps_cmd.iscsicaps = 0;
	caps_cmd.rdmacaps = 0;
	caps_cmd.fcoecaps = 0;

	/*
	 * And now tell the firmware to use the configuration we just loaded.
	 */
	caps_cmd.op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
					   F_FW_CMD_REQUEST | F_FW_CMD_WRITE);
	caps_cmd.cfvalid_to_len16 = htonl(FW_LEN16(caps_cmd));
	ret = t4_wr_mbox(adapter, adapter->mbox, &caps_cmd, sizeof(caps_cmd),
			 NULL);
	if (ret < 0) {
		dev_warn(adapter, "Unable to finalize Firmware Capabilities %d\n",
			 -ret);
		goto bye;
	}

	/*
	 * Tweak configuration based on system architecture, etc.
	 */
	ret = adap_init0_tweaks(adapter);
	if (ret < 0) {
		dev_warn(adapter, "Unable to do init0-tweaks %d\n", -ret);
		goto bye;
	}

	/*
	 * And finally tell the firmware to initialize itself using the
	 * parameters from the Configuration File.
	 */
	ret = t4_fw_initialize(adapter, adapter->mbox);
	if (ret < 0) {
		dev_warn(adapter, "Initializing Firmware failed, error %d\n",
			 -ret);
		goto bye;
	}

	/*
	 * Return successfully and note that we're operating with parameters
	 * not supplied by the driver, rather than from hard-wired
	 * initialization constants buried in the driver.
	 */
	dev_info(adapter,
		 "Successfully configured using Firmware Configuration File \"%s\", version %#x, computed checksum %#x\n",
		 config_name, finiver, cfcsum);

	return 0;

	/*
	 * Something bad happened.  Return the error ...  (If the "error"
	 * is that there's no Configuration File on the adapter we don't
	 * want to issue a warning since this is fairly common.)
	 */
bye:
	if (config_issued && ret != -ENOENT)
		dev_warn(adapter, "\"%s\" configuration file error %d\n",
			 config_name, -ret);

	dev_debug(adapter, "%s: returning ret = %d ..\n", __func__, ret);
	return ret;
}

static int adap_init0(struct adapter *adap)
{
	int ret = 0;
	u32 v, port_vec;
	enum dev_state state;
	u32 params[7], val[7];
	int reset = 1;
	int mbox = adap->mbox;

	/*
	 * Contact FW, advertising Master capability.
	 */
	ret = t4_fw_hello(adap, adap->mbox, adap->mbox, MASTER_MAY, &state);
	if (ret < 0) {
		dev_err(adap, "%s: could not connect to FW, error %d\n",
			__func__, -ret);
		goto bye;
	}

	CXGBE_DEBUG_MBOX(adap, "%s: adap->mbox = %d; ret = %d\n", __func__,
			 adap->mbox, ret);

	if (ret == mbox)
		adap->flags |= MASTER_PF;

	if (state == DEV_STATE_INIT) {
		/*
		 * Force halt and reset FW because a previous instance may have
		 * exited abnormally without properly shutting down
		 */
		ret = t4_fw_halt(adap, adap->mbox, reset);
		if (ret < 0) {
			dev_err(adap, "Failed to halt. Exit.\n");
			goto bye;
		}

		ret = t4_fw_restart(adap, adap->mbox, reset);
		if (ret < 0) {
			dev_err(adap, "Failed to restart. Exit.\n");
			goto bye;
		}
		state = (enum dev_state)((unsigned)state & ~DEV_STATE_INIT);
	}

	t4_get_version_info(adap);

	ret = t4_get_core_clock(adap, &adap->params.vpd);
	if (ret < 0) {
		dev_err(adap, "%s: could not get core clock, error %d\n",
			__func__, -ret);
		goto bye;
	}

	/*
	 * If the firmware is initialized already (and we're not forcing a
	 * master initialization), note that we're living with existing
	 * adapter parameters.  Otherwise, it's time to try initializing the
	 * adapter ...
	 */
	if (state == DEV_STATE_INIT) {
		dev_info(adap, "Coming up as %s: Adapter already initialized\n",
			 adap->flags & MASTER_PF ? "MASTER" : "SLAVE");
	} else {
		dev_info(adap, "Coming up as MASTER: Initializing adapter\n");

		ret = adap_init0_config(adap, reset);
		if (ret == -ENOENT) {
			dev_err(adap,
				"No Configuration File present on adapter. Using hard-wired configuration parameters.\n");
			goto bye;
		}
	}
	if (ret < 0) {
		dev_err(adap, "could not initialize adapter, error %d\n", -ret);
		goto bye;
	}

	/* Find out what ports are available to us. */
	v = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
	    V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_PORTVEC);
	ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, &v, &port_vec);
	if (ret < 0) {
		dev_err(adap, "%s: failure in t4_query_params; error = %d\n",
			__func__, ret);
		goto bye;
	}

	adap->params.nports = hweight32(port_vec);
	adap->params.portvec = port_vec;

	dev_debug(adap, "%s: adap->params.nports = %u\n", __func__,
		  adap->params.nports);

	/*
	 * Give the SGE code a chance to pull in anything that it needs ...
	 * Note that this must be called after we retrieve our VPD parameters
	 * in order to know how to convert core ticks to seconds, etc.
	 */
	ret = t4_sge_init(adap);
	if (ret < 0) {
		dev_err(adap, "t4_sge_init failed with error %d\n",
			-ret);
		goto bye;
	}

	/*
	 * Grab some of our basic fundamental operating parameters.
	 */
#define FW_PARAM_DEV(param) \
	(V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \
	 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param))

#define FW_PARAM_PFVF(param) \
	(V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \
	 V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param) |  \
	 V_FW_PARAMS_PARAM_Y(0) | \
	 V_FW_PARAMS_PARAM_Z(0))

	/* If we're running on newer firmware, let it know that we're
	 * prepared to deal with encapsulated CPL messages.  Older
	 * firmware won't understand this and we'll just get
	 * unencapsulated messages ...
	 */
	params[0] = FW_PARAM_PFVF(CPLFW4MSG_ENCAP);
	val[0] = 1;
	(void)t4_set_params(adap, adap->mbox, adap->pf, 0, 1, params, val);

	/*
	 * Find out whether we're allowed to use the T5+ ULPTX MEMWRITE DSGL
	 * capability.  Earlier versions of the firmware didn't have the
	 * ULPTX_MEMWRITE_DSGL so we'll interpret a query failure as no
	 * permission to use ULPTX MEMWRITE DSGL.
	 */
	if (is_t4(adap->params.chip)) {
		adap->params.ulptx_memwrite_dsgl = false;
	} else {
		params[0] = FW_PARAM_DEV(ULPTX_MEMWRITE_DSGL);
		ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
				      1, params, val);
		adap->params.ulptx_memwrite_dsgl = (ret == 0 && val[0] != 0);
	}

	/*
	 * The MTU/MSS Table is initialized by now, so load their values.  If
	 * we're initializing the adapter, then we'll make any modifications
	 * we want to the MTU/MSS Table and also initialize the congestion
	 * parameters.
	 */
	t4_read_mtu_tbl(adap, adap->params.mtus, NULL);
	if (state != DEV_STATE_INIT) {
		int i;

		/*
		 * The default MTU Table contains values 1492 and 1500.
		 * However, for TCP, it's better to have two values which are
		 * a multiple of 8 +/- 4 bytes apart near this popular MTU.
		 * This allows us to have a TCP Data Payload which is a
		 * multiple of 8 regardless of what combination of TCP Options
		 * are in use (always a multiple of 4 bytes) which is
		 * important for performance reasons.  For instance, if no
		 * options are in use, then we have a 20-byte IP header and a
		 * 20-byte TCP header.  In this case, a 1500-byte MSS would
		 * result in a TCP Data Payload of 1500 - 40 == 1460 bytes
		 * which is not a multiple of 8.  So using an MSS of 1488 in
		 * this case results in a TCP Data Payload of 1448 bytes which
		 * is a multiple of 8.  On the other hand, if 12-byte TCP Time
		 * Stamps have been negotiated, then an MTU of 1500 bytes
		 * results in a TCP Data Payload of 1448 bytes which, as
		 * above, is a multiple of 8 bytes ...
		 */
		for (i = 0; i < NMTUS; i++)
			if (adap->params.mtus[i] == 1492) {
				adap->params.mtus[i] = 1488;
				break;
			}

		t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd,
			     adap->params.b_wnd);
	}
	t4_init_sge_params(adap);
	t4_init_tp_params(adap);
	configure_pcie_ext_tag(adap);

	adap->params.drv_memwin = MEMWIN_NIC;
	adap->flags |= FW_OK;
	dev_debug(adap, "%s: returning zero..\n", __func__);
	return 0;

	/*
	 * Something bad happened.  If a command timed out or failed with EIO
	 * FW does not operate within its spec or something catastrophic
	 * happened to HW/FW, stop issuing commands.
	 */
bye:
	if (ret != -ETIMEDOUT && ret != -EIO)
		t4_fw_bye(adap, adap->mbox);
	return ret;
}

/**
 * t4_os_portmod_changed - handle port module changes
 * @adap: the adapter associated with the module change
 * @port_id: the port index whose module status has changed
 *
 * This is the OS-dependent handler for port module changes.  It is
 * invoked when a port module is removed or inserted for any OS-specific
 * processing.
 */
void t4_os_portmod_changed(const struct adapter *adap, int port_id)
{
	static const char * const mod_str[] = {
		NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM"
	};

	const struct port_info *pi = &adap->port[port_id];

	if (pi->mod_type == FW_PORT_MOD_TYPE_NONE)
		dev_info(adap, "Port%d: port module unplugged\n", pi->port_id);
	else if (pi->mod_type < ARRAY_SIZE(mod_str))
		dev_info(adap, "Port%d: %s port module inserted\n", pi->port_id,
			 mod_str[pi->mod_type]);
	else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED)
		dev_info(adap, "Port%d: unsupported port module inserted\n",
			 pi->port_id);
	else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN)
		dev_info(adap, "Port%d: unknown port module inserted\n",
			 pi->port_id);
	else if (pi->mod_type == FW_PORT_MOD_TYPE_ERROR)
		dev_info(adap, "Port%d: transceiver module error\n",
			 pi->port_id);
	else
		dev_info(adap, "Port%d: unknown module type %d inserted\n",
			 pi->port_id, pi->mod_type);
}

/**
 * link_start - enable a port
 * @dev: the port to enable
 *
 * Performs the MAC and PHY actions needed to enable a port.
 */
int link_start(struct port_info *pi)
{
	struct adapter *adapter = pi->adapter;
	int ret;
	unsigned int mtu;

	mtu = pi->eth_dev->data->dev_conf.rxmode.max_rx_pkt_len -
	      (ETHER_HDR_LEN + ETHER_CRC_LEN);

	/*
	 * We do not set address filters and promiscuity here, the stack does
	 * that step explicitly.
	 */
	ret = t4_set_rxmode(adapter, adapter->mbox, pi->viid, mtu, -1, -1,
			    -1, 1, true);
	if (ret == 0) {
		ret = t4_change_mac(adapter, adapter->mbox, pi->viid,
				    pi->xact_addr_filt,
				    (u8 *)&pi->eth_dev->data->mac_addrs[0],
				    true, true);
		if (ret >= 0) {
			pi->xact_addr_filt = ret;
			ret = 0;
		}
	}
	if (ret == 0)
		ret = t4_link_l1cfg(adapter, adapter->mbox, pi->tx_chan,
				    &pi->link_cfg);
	if (ret == 0) {
		/*
		 * Enabling a Virtual Interface can result in an interrupt
		 * during the processing of the VI Enable command and, in some
		 * paths, result in an attempt to issue another command in the
		 * interrupt context.  Thus, we disable interrupts during the
		 * course of the VI Enable command ...
		 */
		ret = t4_enable_vi_params(adapter, adapter->mbox, pi->viid,
					  true, true, false);
	}
	return ret;
}

/**
 * cxgb4_write_rss - write the RSS table for a given port
 * @pi: the port
 * @queues: array of queue indices for RSS
 *
 * Sets up the portion of the HW RSS table for the port's VI to distribute
 * packets to the Rx queues in @queues.
 */
int cxgb4_write_rss(const struct port_info *pi, const u16 *queues)
{
	u16 *rss;
	int i, err;
	struct adapter *adapter = pi->adapter;
	const struct sge_eth_rxq *rxq;

	/*  Should never be called before setting up sge eth rx queues */
	BUG_ON(!(adapter->flags & FULL_INIT_DONE));

	rxq = &adapter->sge.ethrxq[pi->first_qset];
	rss = rte_zmalloc(NULL, pi->rss_size * sizeof(u16), 0);
	if (!rss)
		return -ENOMEM;

	/* map the queue indices to queue ids */
	for (i = 0; i < pi->rss_size; i++, queues++)
		rss[i] = rxq[*queues].rspq.abs_id;

	err = t4_config_rss_range(adapter, adapter->pf, pi->viid, 0,
				  pi->rss_size, rss, pi->rss_size);
	/*
	 * If Tunnel All Lookup isn't specified in the global RSS
	 * Configuration, then we need to specify a default Ingress
	 * Queue for any ingress packets which aren't hashed.  We'll
	 * use our first ingress queue ...
	 */
	if (!err)
		err = t4_config_vi_rss(adapter, adapter->mbox, pi->viid,
				       F_FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN |
				       F_FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN |
				       F_FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN |
				       F_FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN |
				       F_FW_RSS_VI_CONFIG_CMD_UDPEN,
				       rss[0]);
	rte_free(rss);
	return err;
}

/**
 * setup_rss - configure RSS
 * @adapter: the adapter
 *
 * Sets up RSS to distribute packets to multiple receive queues.  We
 * configure the RSS CPU lookup table to distribute to the number of HW
 * receive queues, and the response queue lookup table to narrow that
 * down to the response queues actually configured for each port.
 * We always configure the RSS mapping for all ports since the mapping
 * table has plenty of entries.
 */
int setup_rss(struct port_info *pi)
{
	int j, err;
	struct adapter *adapter = pi->adapter;

	dev_debug(adapter, "%s:  pi->rss_size = %u; pi->n_rx_qsets = %u\n",
		  __func__, pi->rss_size, pi->n_rx_qsets);

	if (!(pi->flags & PORT_RSS_DONE)) {
		if (adapter->flags & FULL_INIT_DONE) {
			/* Fill default values with equal distribution */
			for (j = 0; j < pi->rss_size; j++)
				pi->rss[j] = j % pi->n_rx_qsets;

			err = cxgb4_write_rss(pi, pi->rss);
			if (err)
				return err;
			pi->flags |= PORT_RSS_DONE;
		}
	}
	return 0;
}

/*
 * Enable NAPI scheduling and interrupt generation for all Rx queues.
 */
static void enable_rx(struct adapter *adap, struct sge_rspq *q)
{
	/* 0-increment GTS to start the timer and enable interrupts */
	t4_write_reg(adap, MYPF_REG(A_SGE_PF_GTS),
		     V_SEINTARM(q->intr_params) |
		     V_INGRESSQID(q->cntxt_id));
}

void cxgbe_enable_rx_queues(struct port_info *pi)
{
	struct adapter *adap = pi->adapter;
	struct sge *s = &adap->sge;
	unsigned int i;

	for (i = 0; i < pi->n_rx_qsets; i++)
		enable_rx(adap, &s->ethrxq[pi->first_qset + i].rspq);
}

/**
 * fw_caps_to_speed_caps - translate Firmware Port Caps to Speed Caps.
 * @port_type: Firmware Port Type
 * @fw_caps: Firmware Port Capabilities
 * @speed_caps: Device Info Speed Capabilities
 *
 * Translate a Firmware Port Capabilities specification to Device Info
 * Speed Capabilities.
 */
static void fw_caps_to_speed_caps(enum fw_port_type port_type,
				  unsigned int fw_caps,
				  u32 *speed_caps)
{
#define SET_SPEED(__speed_name) \
	do { \
		*speed_caps |= ETH_LINK_ ## __speed_name; \
	} while (0)

#define FW_CAPS_TO_SPEED(__fw_name) \
	do { \
		if (fw_caps & FW_PORT_CAP_ ## __fw_name) \
			SET_SPEED(__fw_name); \
	} while (0)

	switch (port_type) {
	case FW_PORT_TYPE_BT_SGMII:
	case FW_PORT_TYPE_BT_XFI:
	case FW_PORT_TYPE_BT_XAUI:
		FW_CAPS_TO_SPEED(SPEED_100M);
		FW_CAPS_TO_SPEED(SPEED_1G);
		FW_CAPS_TO_SPEED(SPEED_10G);
		break;

	case FW_PORT_TYPE_KX4:
	case FW_PORT_TYPE_KX:
	case FW_PORT_TYPE_FIBER_XFI:
	case FW_PORT_TYPE_FIBER_XAUI:
	case FW_PORT_TYPE_SFP:
	case FW_PORT_TYPE_QSFP_10G:
	case FW_PORT_TYPE_QSA:
		FW_CAPS_TO_SPEED(SPEED_1G);
		FW_CAPS_TO_SPEED(SPEED_10G);
		break;

	case FW_PORT_TYPE_KR:
		SET_SPEED(SPEED_10G);
		break;

	case FW_PORT_TYPE_BP_AP:
	case FW_PORT_TYPE_BP4_AP:
		SET_SPEED(SPEED_1G);
		SET_SPEED(SPEED_10G);
		break;

	case FW_PORT_TYPE_BP40_BA:
	case FW_PORT_TYPE_QSFP:
		SET_SPEED(SPEED_40G);
		break;

	case FW_PORT_TYPE_CR_QSFP:
	case FW_PORT_TYPE_SFP28:
	case FW_PORT_TYPE_KR_SFP28:
		FW_CAPS_TO_SPEED(SPEED_1G);
		FW_CAPS_TO_SPEED(SPEED_10G);
		FW_CAPS_TO_SPEED(SPEED_25G);
		break;

	case FW_PORT_TYPE_CR2_QSFP:
		SET_SPEED(SPEED_50G);
		break;

	case FW_PORT_TYPE_KR4_100G:
	case FW_PORT_TYPE_CR4_QSFP:
		FW_CAPS_TO_SPEED(SPEED_25G);
		FW_CAPS_TO_SPEED(SPEED_40G);
		FW_CAPS_TO_SPEED(SPEED_100G);
		break;

	default:
		break;
	}

#undef FW_CAPS_TO_SPEED
#undef SET_SPEED
}

/**
 * cxgbe_get_speed_caps - Fetch supported speed capabilities
 * @pi: Underlying port's info
 * @speed_caps: Device Info speed capabilities
 *
 * Fetch supported speed capabilities of the underlying port.
 */
void cxgbe_get_speed_caps(struct port_info *pi, u32 *speed_caps)
{
	*speed_caps = 0;

	fw_caps_to_speed_caps(pi->port_type, pi->link_cfg.supported,
			      speed_caps);

	if (!(pi->link_cfg.supported & FW_PORT_CAP_ANEG))
		*speed_caps |= ETH_LINK_SPEED_FIXED;
}

/**
 * cxgb_up - enable the adapter
 * @adap: adapter being enabled
 *
 * Called when the first port is enabled, this function performs the
 * actions necessary to make an adapter operational, such as completing
 * the initialization of HW modules, and enabling interrupts.
 */
int cxgbe_up(struct adapter *adap)
{
	enable_rx(adap, &adap->sge.fw_evtq);
	t4_sge_tx_monitor_start(adap);
	t4_intr_enable(adap);
	adap->flags |= FULL_INIT_DONE;

	/* TODO: deadman watchdog ?? */
	return 0;
}

/*
 * Close the port
 */
int cxgbe_down(struct port_info *pi)
{
	struct adapter *adapter = pi->adapter;
	int err = 0;

	err = t4_enable_vi(adapter, adapter->mbox, pi->viid, false, false);
	if (err) {
		dev_err(adapter, "%s: disable_vi failed: %d\n", __func__, err);
		return err;
	}

	t4_reset_link_config(adapter, pi->port_id);
	return 0;
}

/*
 * Release resources when all the ports have been stopped.
 */
void cxgbe_close(struct adapter *adapter)
{
	struct port_info *pi;
	int i;

	if (adapter->flags & FULL_INIT_DONE) {
		t4_intr_disable(adapter);
		t4_sge_tx_monitor_stop(adapter);
		t4_free_sge_resources(adapter);
		for_each_port(adapter, i) {
			pi = adap2pinfo(adapter, i);
			if (pi->viid != 0)
				t4_free_vi(adapter, adapter->mbox,
					   adapter->pf, 0, pi->viid);
			rte_free(pi->eth_dev->data->mac_addrs);
		}
		adapter->flags &= ~FULL_INIT_DONE;
	}

	if (adapter->flags & FW_OK)
		t4_fw_bye(adapter, adapter->mbox);
}

int cxgbe_probe(struct adapter *adapter)
{
	struct port_info *pi;
	int chip;
	int func, i;
	int err = 0;
	u32 whoami;

	whoami = t4_read_reg(adapter, A_PL_WHOAMI);
	chip = t4_get_chip_type(adapter,
			CHELSIO_PCI_ID_VER(adapter->pdev->id.device_id));
	if (chip < 0)
		return chip;

	func = CHELSIO_CHIP_VERSION(chip) <= CHELSIO_T5 ?
	       G_SOURCEPF(whoami) : G_T6_SOURCEPF(whoami);

	adapter->mbox = func;
	adapter->pf = func;

	t4_os_lock_init(&adapter->mbox_lock);
	TAILQ_INIT(&adapter->mbox_list);

	err = t4_prep_adapter(adapter);
	if (err)
		return err;

	setup_memwin(adapter);
	err = adap_init0(adapter);
	if (err) {
		dev_err(adapter, "%s: Adapter initialization failed, error %d\n",
			__func__, err);
		goto out_free;
	}

	if (!is_t4(adapter->params.chip)) {
		/*
		 * The userspace doorbell BAR is split evenly into doorbell
		 * regions, each associated with an egress queue.  If this
		 * per-queue region is large enough (at least UDBS_SEG_SIZE)
		 * then it can be used to submit a tx work request with an
		 * implied doorbell.  Enable write combining on the BAR if
		 * there is room for such work requests.
		 */
		int s_qpp, qpp, num_seg;

		s_qpp = (S_QUEUESPERPAGEPF0 +
			(S_QUEUESPERPAGEPF1 - S_QUEUESPERPAGEPF0) *
			adapter->pf);
		qpp = 1 << ((t4_read_reg(adapter,
				A_SGE_EGRESS_QUEUES_PER_PAGE_PF) >> s_qpp)
				& M_QUEUESPERPAGEPF0);
		num_seg = CXGBE_PAGE_SIZE / UDBS_SEG_SIZE;
		if (qpp > num_seg)
			dev_warn(adapter, "Incorrect SGE EGRESS QUEUES_PER_PAGE configuration, continuing in debug mode\n");

		adapter->bar2 = (void *)adapter->pdev->mem_resource[2].addr;
		if (!adapter->bar2) {
			dev_err(adapter, "cannot map device bar2 region\n");
			err = -ENOMEM;
			goto out_free;
		}
		t4_write_reg(adapter, A_SGE_STAT_CFG, V_STATSOURCE_T5(7) |
			     V_STATMODE(0));
	}

	for_each_port(adapter, i) {
		char name[RTE_ETH_NAME_MAX_LEN];
		struct rte_eth_dev_data *data = NULL;
		const unsigned int numa_node = rte_socket_id();

		pi = &adapter->port[i];
		pi->adapter = adapter;
		pi->xact_addr_filt = -1;
		pi->port_id = i;

		snprintf(name, sizeof(name), "cxgbe%d",
			 adapter->eth_dev->data->port_id + i);

		if (i == 0) {
			/* First port is already allocated by DPDK */
			pi->eth_dev = adapter->eth_dev;
			goto allocate_mac;
		}

		/*
		 * now do all data allocation - for eth_dev structure,
		 * and internal (private) data for the remaining ports
		 */

		/* reserve an ethdev entry */
		pi->eth_dev = rte_eth_dev_allocate(name);
		if (!pi->eth_dev)
			goto out_free;

		data = rte_zmalloc_socket(name, sizeof(*data), 0, numa_node);
		if (!data)
			goto out_free;

		data->port_id = adapter->eth_dev->data->port_id + i;

		pi->eth_dev->data = data;

allocate_mac:
		pi->eth_dev->device = &adapter->pdev->device;
		pi->eth_dev->data->dev_private = pi;
		pi->eth_dev->dev_ops = adapter->eth_dev->dev_ops;
		pi->eth_dev->tx_pkt_burst = adapter->eth_dev->tx_pkt_burst;
		pi->eth_dev->rx_pkt_burst = adapter->eth_dev->rx_pkt_burst;

		rte_eth_copy_pci_info(pi->eth_dev, adapter->pdev);

		pi->eth_dev->data->mac_addrs = rte_zmalloc(name,
							   ETHER_ADDR_LEN, 0);
		if (!pi->eth_dev->data->mac_addrs) {
			dev_err(adapter, "%s: Mem allocation failed for storing mac addr, aborting\n",
				__func__);
			err = -1;
			goto out_free;
		}
	}

	if (adapter->flags & FW_OK) {
		err = t4_port_init(adapter, adapter->mbox, adapter->pf, 0);
		if (err) {
			dev_err(adapter, "%s: t4_port_init failed with err %d\n",
				__func__, err);
			goto out_free;
		}
	}

	cfg_queues(adapter->eth_dev);

	print_adapter_info(adapter);
	print_port_info(adapter);

	err = init_rss(adapter);
	if (err)
		goto out_free;

	return 0;

out_free:
	for_each_port(adapter, i) {
		pi = adap2pinfo(adapter, i);
		if (pi->viid != 0)
			t4_free_vi(adapter, adapter->mbox, adapter->pf,
				   0, pi->viid);
		/* Skip first port since it'll be de-allocated by DPDK */
		if (i == 0)
			continue;
		if (pi->eth_dev->data)
			rte_free(pi->eth_dev->data);
	}

	if (adapter->flags & FW_OK)
		t4_fw_bye(adapter, adapter->mbox);
	return -err;
}