DPDK logo

Elixir Cross Referencer

/*-
 *   BSD LICENSE
 *
 *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or without
 *   modification, are permitted provided that the following conditions
 *   are met:
 *
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in
 *       the documentation and/or other materials provided with the
 *       distribution.
 *     * Neither the name of Intel Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
#include <stdint.h>
#include <stddef.h>
#include <stdlib.h>
#include <stdio.h>
#include <stdarg.h>
#include <errno.h>
#include <sys/queue.h>

#include <rte_memory.h>
#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_eal_memconfig.h>
#include <rte_launch.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_common.h>
#include <rte_string_fns.h>
#include <rte_spinlock.h>
#include <rte_memcpy.h>
#include <rte_atomic.h>

#include "malloc_elem.h"
#include "malloc_heap.h"

/* since the memzone size starts with a digit, it will appear unquoted in
 * rte_config.h, so quote it so it can be passed to rte_str_to_size */
#define MALLOC_MEMZONE_SIZE RTE_STR(RTE_MALLOC_MEMZONE_SIZE)

/*
 * returns the configuration setting for the memzone size as a size_t value
 */
static inline size_t
get_malloc_memzone_size(void)
{
	return rte_str_to_size(MALLOC_MEMZONE_SIZE);
}

/*
 * reserve an extra memory zone and make it available for use by a particular
 * heap. This reserves the zone and sets a dummy malloc_elem header at the end
 * to prevent overflow. The rest of the zone is added to free list as a single
 * large free block
 */
static int
malloc_heap_add_memzone(struct malloc_heap *heap, size_t size, unsigned align)
{
	const unsigned mz_flags = 0;
	const size_t block_size = get_malloc_memzone_size();
	/* ensure the data we want to allocate will fit in the memzone */
	const size_t min_size = size + align + MALLOC_ELEM_OVERHEAD * 2;
	const struct rte_memzone *mz = NULL;
	struct rte_mem_config *mcfg = rte_eal_get_configuration()->mem_config;
	unsigned numa_socket = heap - mcfg->malloc_heaps;

	size_t mz_size = min_size;
	if (mz_size < block_size)
		mz_size = block_size;

	char mz_name[RTE_MEMZONE_NAMESIZE];
	snprintf(mz_name, sizeof(mz_name), "MALLOC_S%u_HEAP_%u",
		     numa_socket, heap->mz_count++);

	/* try getting a block. if we fail and we don't need as big a block
	 * as given in the config, we can shrink our request and try again
	 */
	do {
		mz = rte_memzone_reserve(mz_name, mz_size, numa_socket,
					 mz_flags);
		if (mz == NULL)
			mz_size /= 2;
	} while (mz == NULL && mz_size > min_size);
	if (mz == NULL)
		return -1;

	/* allocate the memory block headers, one at end, one at start */
	struct malloc_elem *start_elem = (struct malloc_elem *)mz->addr;
	struct malloc_elem *end_elem = RTE_PTR_ADD(mz->addr,
			mz_size - MALLOC_ELEM_OVERHEAD);
	end_elem = RTE_PTR_ALIGN_FLOOR(end_elem, RTE_CACHE_LINE_SIZE);

	const unsigned elem_size = (uintptr_t)end_elem - (uintptr_t)start_elem;
	malloc_elem_init(start_elem, heap, mz, elem_size);
	malloc_elem_mkend(end_elem, start_elem);
	malloc_elem_free_list_insert(start_elem);

	/* increase heap total size by size of new memzone */
	heap->total_size+=mz_size - MALLOC_ELEM_OVERHEAD;
	return 0;
}

/*
 * Iterates through the freelist for a heap to find a free element
 * which can store data of the required size and with the requested alignment.
 * Returns null on failure, or pointer to element on success.
 */
static struct malloc_elem *
find_suitable_element(struct malloc_heap *heap, size_t size, unsigned align)
{
	size_t idx;
	struct malloc_elem *elem;

	for (idx = malloc_elem_free_list_index(size);
		idx < RTE_HEAP_NUM_FREELISTS; idx++)
	{
		for (elem = LIST_FIRST(&heap->free_head[idx]);
			!!elem; elem = LIST_NEXT(elem, free_list))
		{
			if (malloc_elem_can_hold(elem, size, align))
				return elem;
		}
	}
	return NULL;
}

/*
 * Main function called by malloc to allocate a block of memory from the
 * heap. It locks the free list, scans it, and adds a new memzone if the
 * scan fails. Once the new memzone is added, it re-scans and should return
 * the new element after releasing the lock.
 */
void *
malloc_heap_alloc(struct malloc_heap *heap,
		const char *type __attribute__((unused)), size_t size, unsigned align)
{
	size = RTE_CACHE_LINE_ROUNDUP(size);
	align = RTE_CACHE_LINE_ROUNDUP(align);
	rte_spinlock_lock(&heap->lock);
	struct malloc_elem *elem = find_suitable_element(heap, size, align);
	if (elem == NULL){
		if ((malloc_heap_add_memzone(heap, size, align)) == 0)
			elem = find_suitable_element(heap, size, align);
	}

	if (elem != NULL){
		elem = malloc_elem_alloc(elem, size, align);
		/* increase heap's count of allocated elements */
		heap->alloc_count++;
	}
	rte_spinlock_unlock(&heap->lock);
	return elem == NULL ? NULL : (void *)(&elem[1]);

}

/*
 * Function to retrieve data for heap on given socket
 */
int
malloc_heap_get_stats(const struct malloc_heap *heap,
		struct rte_malloc_socket_stats *socket_stats)
{
	size_t idx;
	struct malloc_elem *elem;

	/* Initialise variables for heap */
	socket_stats->free_count = 0;
	socket_stats->heap_freesz_bytes = 0;
	socket_stats->greatest_free_size = 0;

	/* Iterate through free list */
	for (idx = 0; idx < RTE_HEAP_NUM_FREELISTS; idx++) {
		for (elem = LIST_FIRST(&heap->free_head[idx]);
			!!elem; elem = LIST_NEXT(elem, free_list))
		{
			socket_stats->free_count++;
			socket_stats->heap_freesz_bytes += elem->size;
			if (elem->size > socket_stats->greatest_free_size)
				socket_stats->greatest_free_size = elem->size;
		}
	}
	/* Get stats on overall heap and allocated memory on this heap */
	socket_stats->heap_totalsz_bytes = heap->total_size;
	socket_stats->heap_allocsz_bytes = (socket_stats->heap_totalsz_bytes -
			socket_stats->heap_freesz_bytes);
	socket_stats->alloc_count = heap->alloc_count;
	return 0;
}